Features of Backhoe Loader 630:
1. Equipped with reliable genuine Cummins engine
2. 4 forward & 4 reverse synchromesh mechanical shift transmission
3. Combined seal cylinder obtains high seal performance and more reliability
4. Improved loader and backhoe performance
5. CARRARO wet type rear axle with multi-disc brake& CARRARO front axle
6. New-type cab with more space, increases comfort and visibility
7. With 2 wheel driving or 4 wheel driving for option
| Overall Dimension | |||
| 1 | Length(with bucket on ground) | 7085(mm) | |
| 2 | Width | 2313(mm) | |
| 3 | Load Bucket width | 2313(mm) | |
| 4 | Height(To the top of the cab) | 2710 (mm) | |
| 5 | Height(To the top of the digging pole) | 3424 (mm) | |
| 6 | Wheelbase | 2155.5(mm) | |
| 7 | Back wheel Tread | 1700(mm) | |
| 8 | Fore wheel Tread | 1880(mm) | |
| 9 | Min. ground clearance | 355(mm) for 2WD 275(mm) for 4WD | |
| Main Loading Technical Specification | |||
| 1 | Rated load | 1700(Kg) | |
| 2 | Operating weight | 7600KG | |
| 3 | Max lifting capability | >2500KG | |
| 4 | Rated load bucket capacity | 1.0(m3) | |
| 5 | Max. load breakout force | >60kN | |
| 6 | Max. dump clearance | 2714(mm) | |
| 7 | Max. Dump reach | 845(mm) | |
| 8 | Dump angle at any position | ≥43.5° | |
| 9 | Min. turning radius | ||
| (1) Outside of bucket | 5280(mm) for 2WD 5670(mm) for 4WD | ||
| (2) Center of front wheel | 3795 (mm) for 2WD 4380(mm) for 4WD | ||
| 10 | Lifting time of loading bucket | ≤4.5(sec.) | |
| 11 | Lowering time of loading bucket | ≤3.5(sec.) | |
| 12 | Dumping time | ≤1.5(sec.) | |
| 13 | Traveling speed(Km/h),4 forward and 4 reverse | ||
| (1) Ⅰ gear forward | 6 | ||
| (2) Ⅱ gear forward | 9.6 | ||
| (3) Ⅲ gear forward | 20.5 | ||
| (4) Ⅳ gear forward | 38 | ||
| (1) Ⅰ gear reverse | 6.0 | ||
| (2) Ⅱ gear reverse | 9.6 | ||
| (3) Ⅲ gear reverse | 20.5 | ||
| (4) Ⅳ gear reverse | 38 | ||
| Main Digging Technical Specification | |||
| 1 | Rated digging bucket capacity | 0.3(m3) | |
| 2 | Max. digging depth | 4405(mm) | |
| 3 | Max. digging force | >50±10%kN | |
| 4 | Max. digging radius | 5481(mm) | |
| 5 | Max. dumping height | 3737(mm) | |
| Diesel engine | |||
| 1 | Model | Cummins B4.5 | DongFeng 4BTA3.9-C110 |
| 2 | Type | Direct injection. Turbocharged. Water cooling | |
| 3 | Rated power / Rated speed | 74 (kW) / 2200(r/min) | 82 (kW) / 2200(r/min) |
| 4 | Displacement | 4.5(L) | 3.9(L) |
| 5 | Inter-bore of cylinder/stroke | 102/138(mm) | 102/120(mm) |
| 6 | Model, Voltage and Power of starting motor | ST9371 12(V) 4.8(kW) | ST 9501 12(V) 6(kw) |
| 7 | Model, Voltage and Starting Current of Alternator | EE9242 12(V) 95Amp | EE 9235 14(V) 70Amp |
| 8 | Max. Torque | 414(N.M) @1500RPM | 460N.m@1500RPM |
| 9 | Starting type | Electric | |
| 10 | Min. specific fuel consumption | 207(g/Kw.h) | |
| Transmission System | |||
| 1. Torque Converter | |||
| 1 | Model | CARRARO | |
| 2 | Cooling type | Pressure oil circulating | |
| 2. Transmission case | |||
| 1 | Model | CARRARO | |
| 2 | Type | Synchromesh mechanical shift | |
| 3 | Gear shift position | 4 Forward and 4 reverse gears | |
| 3. Axle and Tire | |||
| 1 | Model | CARRARO | |
| 2 | Type of main reducer | spiral bevel gear, single stage | |
| 3 | Type of final reducer | Single stage planetary | |
| 4 | Max. steering angle | 55° | |
| 5 | Tire type | 4WD fore tire12-16.5NHS-10PR | |
| 2WD fore tire11L-16F3-12PR | |||
| Rear tire 19.5L-24R4-12PR | |||
| Working Device Hydraulic System | |||
| 1 | Model of oil pump | K2215(CASAPPA) | |
| 2 | System pressure | 230(kgf/cm2) | |
| 3 | Model of priority valve | WALVOIL SDS180 | |
| Steering System | |||
| 1 | Type | Fore wheel Steering | |
| 2 | Model of steering pump | K2215(CASAPPA) | |
| 3 | Model of steering gear | 150-1219(DAIVFOSS) | |
| 4 | System pressure | 140(kgf/cm2) | |
| Oil Capacity | |||
| 1 | Fuel(diesel) | 151(L) | |
| 2 | Engine lubricating oil | 11(L) | |
| 3 | Oil for converter and gear box | 18.5(L) | |
| 4 | Oil for hydraulic system | 110(L) | |
| 5 | Oil for driving axles(F/R) | 7.6+17(L) | |
