Features
1. The 955N wheel loader is installed with Weichai engine.
2. Two forward and one reverse power shift transmissions are installed.
3. Combined sealing cylinder brings good sealing performance and reliability.
| Overall Dimension | ||
| 1 | Length (with bucket on ground) | 8100(mm) |
| 2 | Width (to outside of wheels) | 2800(mm) |
| 3 | Bucket width | 2946(mm) |
| 4 | Height (to the top of the cab) | 3500(mm) |
| 5 | Wheel base | 3100(mm) |
| 6 | Tread | 2200(mm) |
| 7 | Min. ground clearance | 450(mm) |
| Main Technical Specification of Wheel Loader | ||
| 1 | Rated loading capacity | 5000(kg) |
| 2 | Operating weight | 16300(1±5%)kg |
| 3 | Rated bucket capacity | 3.0(m3) |
| 4 | Max. breakout force | 160KN |
| 5 | Max. dumping clearance | 3091(mm) |
| 6 | Dumping reach | 1090(mm) |
| 7 | Dumping angle at any position | ≥45° |
| 8 | Digging depth (with bucket bottom horizontal) | 165(mm) |
| 9 | Min. turning radius | |
| (1) Outside of bucket | 6575(mm) | |
| (2) Outside of rear wheel | 5970(mm) | |
| 10 | Max. steering angle | 38o |
| 11 | Oscillating angle of rear axle | ±13o |
| 12 | Lifting time of bucket | ≤6.2(sec.) |
| 13 | Lowering time of bucket | ≤3.8(sec.) |
| 14 | Dumping time | ≤1.8(sec.) |
| 15 | Traveling speed (2 forward and 1 reverse) | |
| (1) 1st gear (forward/reverse) | 12.1/16.5(km/h) | |
| (2) 2nd gear forward | 37.4(km/h) | |
| Diesel Engine of Wheel Loader | ||
| 1 | Model | Chinese Engine WD10G220E23 |
| 2 | Type | Direct injection, naturally aspirated, water cooled |
| 3 | Rated power | 162(kW) |
| 4 | Cylinder diameter/stroke | 126/130(mm) |
| 5 | Displacement of cylinder | 9.726(L) |
| 6 | Model of starting motor | KB-24V |
| 7 | Power of starting motor | 7.5(kW) |
| 8 | Voltage of starting motor | 24(V) |
| 9 | Rated speed | 2000(r/min) |
| 10 | Max. torque | >900(N.m) |
| 11 | Starting type | Electrical starting |
| 12 | Min. specific fuel consumption | <220g/kW.h) |
| 13 | Engine specific oil consumption | 0.95-1.77(g/kW.h) |
| 14 | Net weight | 1000(kg) |
| Transmission System of Wheel Loader | ||
| I. Hydraulic Torque Converter | ||
| 1 | Model | ZL50B-012 |
| 2 | Type of torque converter | 4-element, single stage |
| 3 | Torque ratio | 4 |
| 4 | Cooling type | Pressure oil circulating |
| 5 | Type of gearbox | Power shift, constant-mesh spur gear |
| 6 | Gear shift | 2 forward and 1 reverse gears |
| II. Axle and Tire | ||
| 1 | Type of main reducer | Spiral bevel gear, single stage |
| 2 | Gear ratio of main reducer | 4.625 |
| 3 | Type of final reducer | Single stage planetary |
| 4 | Gear ratio of final reducer | 4.929 |
| 5 | Total gear ratio | 22.795 |
| 6 | Max. drawing force | 150kN |
| 7 | Size of tire | 23.5-25-16PR |
| Working Device Hydraulic System of Wheel Loader | ||
| 1 | Model of oil pump | JHP2080S |
| 2 | System pressure | 19MPa |
| 3 | Model of distribution valve | HDS-32II-YL19 |
| 4 | Dimension of lifting cylinder(D×L) | Ф160×90×705(mm) |
| 5 | Dimension of tilting cylinder(D×L) | Ф180×90×530(mm) |
| Steering System | ||
| 1 | Type | Middle articulated frame, full-hydraulic steering |
| 2 | Model of steering pump | JHP2080S |
| 3 | Model of redirector | TLF1-E1000B+FKB6020 |
| 4 | Model of priority valve | YXL-F250F-N7 |
| 5 | System pressure | 16MPa |
| 6 | Dimension of steering cylinder | Ф90×400(mm) |
| Braking System | ||
| 1 | Type of service brake | Caliper disc brake, air-over-oil activated 4 wheel brake |
| 2 | Air pressure | 6-7.5(kgf/cm2) |
| 3 | Type of parking brake | Hand brake, flexible shaft control drum brake |
| Oil Capacity of Wheel Loader | ||
| 1 | Fuel(diesel) | 250(L) |
| 2 | Engine lubricating oil | 20(L) |
| 3 | Oil for converter and gear box | 45(L) |
| 4 | Oil for hydraulic system | 180(L) |
| 5 | Oil for driving axles (F/R) | 26(L) |
| 6 | Oil for planetary reducer | 14(L) |
| 7 | Oil for braking system | 3(L) |
