Features
1. The 966 wheel loader uses engine from Shanghai Diesel Engine Co. Ltd
2. The KD switch brings optimal efficiency and easy operation of the wheeled loader.
3. Our front end loader is installed with dry type axle from MERITOR
4. Reliable ZF gearbox and torque converter
5. Bucket automatic leveling is available
6. The boom comes with position limitation function.
7. For high seal performance and optimal reliability, this wheel loader is engineered with combined seal cylinder.
| Overall Dimension | ||
| 1 | Length (with bucket on ground) | 8580(mm) |
| 2 | Width (to outside of wheels) | 2897(mm) |
| 3 | Bucket width | 3048(mm) |
| 4 | Height (to the top of the cab) | 3532(mm) |
| 5 | Wheel base | 3300(mm) |
| 6 | Tread | 2300(mm) |
| 7 | Min. ground clearance | 403(mm) |
| Main Technical Specification of Wheel Loader | ||
| 1 | Rated loading capacity | 6000(kg) |
| 2 | Operating weight | 19100(1±5%)kg |
| 3 | Rated bucket capacity | 3.5(m3) |
| 4 | Max. breakout force | 190KN |
| 5 | Max. dumping clearance | 3393(mm) |
| 6 | Dumping reach | 1365(mm) |
| 7 | Dumping angle at any position | ≥45° |
| 8 | Digging depth (with bucket bottom horizontal) | 212(mm) |
| 9 | Min. turning radius | |
| (1) Outside of bucket | 6970(mm) | |
| (2) Outside of rear wheel | 6258(mm) | |
| 10 | Max. steering angle | 38o |
| 11 | Oscillating angle of rear axle | ±12o |
| 12 | Lifting time of bucket | ≤5.8(sec.) |
| 13 | Lowering time of bucket | ≤3.2(sec.) |
| 14 | Dumping time | ≤1.5(sec.) |
| 15 | Traveling speed (2 forward and 1 reverse) | |
| (1) 1st gear (forward/reverse) | 12.1/16.5(km/h) | |
| (2) 2nd gear forward | 37.4(km/h) | |
| Diesel Engine of Wheel Loader | ||
| 1 | Model | Shanghai Diesel Engine SC11CB240.1G2B1 |
| 2 | Type | Direct injection, naturally aspirated, water cooled |
| 3 | Rated power | 174.5(kW) |
| 4 | Cylinder diameter/stroke | 121/162(mm) |
| 5 | Displacement of cylinder | 10.5(L) |
| 6 | Model of starting motor | 4N3181 |
| 7 | Power of starting motor | 7.5(kW) |
| 8 | Voltage of starting motor | 24(V) |
| 9 | Rated speed | 2200(r/min) |
| 10 | Max. torque | 912(N.m)/1400rpm |
| 11 | Starting type | Electrical starting |
| 12 | Min. specific fuel consumption | 238g/kW.h) |
| 13 | Engine specific oil consumption | 0.95-1.77(g/kW.h) |
| 14 | Net weight | 960(kg) |
| Transmission System of Wheel Loader | ||
| I. Hydraulic Torque Converter | ||
| 1 | Model | ZL50B-012 |
| 2 | Type of torque converter | 3-element, single stage |
| 3 | Torque ratio | 2.55 |
| 4 | Cooling type | Pressure oil circulating |
| 5 | Type of gearbox | Power shift, constant-mesh spur gear |
| 6 | Gear shift | 4 forward and 3 reverse gears |
| II. Axle and Tire | ||
| 1 | Type of main reducer | Spiral bevel gear, single stage |
| 2 | Gear ratio of main reducer | 4.875 |
| 3 | Type of final reducer | Single stage planetary |
| 4 | Gear ratio of final reducer | 4.94 |
| 5 | Total gear ratio | 24.0825 |
| 6 | Max. drawing force | 150kN |
| 7 | Size of tire | 23.5-25-20PR L-3 |
| Working Device Hydraulic System of Wheel Loader | ||
| 1 | Model of oil pump | JHP2080-Gj0020-XF ( From Jinan Hydraulic Pump Co) |
| 2 | System pressure | 20MPa |
| 3 | Model of distribution valve | HDS-32II-YL19 |
| 4 | Dimension of lifting cylinder(D×L) | Ф160×90×705(mm) |
| 5 | Dimension of tilting cylinder(D×L) | Ф180×90×530(mm) |
| Steering System | ||
| 1 | Type | Articulated frame, full-hydraulic steering |
| 2 | Model of steering pump | JHP2080S |
| 3 | Model of redirector | TLF1-E1000B+FKB6020 |
| 4 | Model of priority valve | YXL-F250F-N7 |
| 5 | System pressure | 16MPa |
| 6 | Dimension of steering cylinder | Ф90×400(mm) |
| Braking System | ||
| 1 | Type of service brake | Caliper disc brake, air-over-oil activated 4 wheel brake |
| 2 | Air pressure | 7-8(kgf/cm2) |
| 3 | Type of parking brake | Drum brake, manual control cutting-off air brake |
| Oil Capacity of Wheel Loader | ||
| 1 | Fuel(diesel) | 350(L) |
| 2 | Engine lubricating oil | 28(L) |
| 3 | Braking System | 2x2(L) |
| 4 | Oil for converter and gear box | 45(L) |
| 5 | Oil for hydraulic system | 250(L) |
| 6 | Oil for driving axles | 30(L)+24(L) |
